The Location of the Area on each Artifact Where PIXE Analysis was Undertaken
EARLY DYNASTIC I
K 946
Pin (one of a pair)
On the shaft, 95 mm from the missing head
FM 229 667
Dagger/knife
On the flat side of the blade, 160 mm from the point of the blade
FM 158 024
Awl
On the shaft, 13 mm from the rounded head
FM 158 162
Chisel (in two pieces)
On the metallographic section for a cut at the ancient break of one fragment
FM 158 167
Chisel
On the metallographic section for a notch cut at 15 mm from the blunt end
FM 236 490
Chisel
On the shaft, 41 mm from the broken tip
FM 158 182
Flat adze
On the flat side of the blade, 53 mm from the working edge
FM 158 183
Flat adze
On the metallographic section for a cut taken from the side of the working edge
FM 228 172
Flat adze
On the metallographic section for a cut from the side, 110 mm from the working end
FM 236 147
Flat adze
On the metallographic section for a notch cut close to the middle of the working edge
FM 156 600
Saw
At one corner, 5 mm from the broader end
FM 158 103
Saw
On the tang, 50 mm from one end
V 793/794
Bident
On the side of one prong, 33 mm from the tip
FM 158 017
Toggle pin
On the shaft, 35 mm from the head
EARLY DYNASTIC III/AKKADIAN
FM 158 020
Pin
On the metallographic section for a cut taken across the broader end
FM 158 022
Toggle pin
On the shaft, 43 mm from the rounded head
FM 158 023
Toggle pin
On the shaft under the ring, 18 mm from the head
FM 158 177
Pin, with a bovine head
On the metallographic section for a cut taken across the broken end of the shaft
FM 228 459
Pin
On the shaft, 43 mm from the head
FM 228 462
Toggle pin
On the shaft, 41 mm from the pointed head
FM 228 464
Toggle pin
On the shaft, 50 mm from the head
FM 228 465
Toggle pin
On the metallographic section for a cut taken across the tip of the shaft
FM 228 466
Pin
On the shaft, 59 mm from the head
FM 228 467
Toggle pin
On the shaft, 21 mm from the tip of the shaft
FM 228 469
Needle
On the shaft, 52 mm from the eyelet
FM 228 471
Toggle pin
On the shaft, 23 mm from the head
FM 228 472
Pin
On the shaft, 110 mm from the head
FM 228 473
Pin
On the metallographic section for a cut taken from the tip of the shaft
FM 228 515
Toggle pin, with a lapis lazuli head
On the shaft, 43 mm from the head
FM 228 587
Toggle pin
On the shaft, 65 mm from the head
FM 228 590
Toggle pin
On the shaft, 18 mm from the pointed head
FM 228 594
Pin, with a lapis bead on the head
On the shaft, 20 mm from the pointed head
FM 228 595
Pin
On the metallographic section for a cut taken across the fragmented broader end
FM 228 596
Toggle pin
On the shaft, 53 mm from the head
FM 228 597
Toggle pin
On the shaft, 26 mm from the head
FM 236 149
Toggle pin
On the shaft, 47 mm from the head
FM 236 150
Toggle pin
On the shaft, 65 mm from the head
FM 236 152
Pin
On the metallographic section for a cut taken from the tip of the shaft
FM 236 153
Toggle pin
On the shaft, 28 mm from the head
FM 236 154
Toggle pin
On the shaft, 108 mm from the tip of the shaft
FM 158 143
Dagger/knife
On the blade, 28 mm from the broken end of the tang
FM 158 153
Dagger, with a rivet in the tang
On the tang, 10 mm from the broken end
FM 158 154
Dagger/knife
On the metallographic section for a cut taken across the broader end of the blade
FM 158 158
Blade (folded socket type?)
On the flat side, 30 mm from the broken, narrow end
FM 236 486
Dagger/knife
On the flat side, 30 mm from the end of the tang
FM 236 487
Dagger/knife
On the surface of the tang, 14 mm from the end
FM 228 598
Awl
On the side, 15 mm from the blunt end
FM 228 719
Awl/chisel
On a flat side, 36 mm from the working end
FM 236 611
Awl
On the shaft, 24 mm from the blunt end
FM 236 142
Flat adze
On the metallographic section for a notch cut in the side, 35 mm from the working edge
FM 236 499
Flat adze
On the metallographic section for a notch cut in the side, 54 mm from the working edge
FM 236 501
Chisel
On a flat surface, 34 mm from the working edge
FM 228 468
Handle of a vessel
On a flat side, 34 mm from the plain end
FM 228 588
Flat toggle pin
On the flat surface, 25 mm from the end of the tang
FM 228 592
Flat toggle pin
On the back of the longer strip, 138 mm from the tip of the shaft
FM 236 577
Handle of a vessel
On the shaft, 38 mm from the blunt end